|Type of Publication:||Article||Keywords:||microfluidics, PDMS, soft lithography, solvent compatibility|
|Authors:||George Maltezos; Erika Garcia; G. Hanrahan; F. A. Gomez; Saurabh Vyawahare; R. M. van Dam; Y. Chen; Axel Scherer|
|Journal:||Lab on a Chip||Volume:||7|
A current problem in microfluidics is that poly(dimethylsiloxane) (PDMS), used to fabricate many microfluidic devices, is not compatible with most organic solvents. Fluorinated compounds are more chemically robust than PDMS but, historically, it has been nearly impossible to construct valves out of them by multilayer soft lithography (MSL) due to the difficulty of bonding layers made of non-stick fluoropolymers necessary to create traditional microfluidic valves. With our new three-dimensional (3D) valve design we can fabricate microfluidic devices from fluorinated compounds in a single monolithic layer that is resistant to most organic solvents with minimal swelling. This paper describes the design and development of 3D microfluidic valves by molding of a perfluoropolyether, termed Sifel, onto printed wax molds. The fabrication of Sifel-based microfluidic devices using this technique has great potential in chemical synthesis and analysis.
PDF: Caltech only
Online version (publisher)
Administrative and Financial ContactKate FiniganMC 200-36, Caltech1200 E California BlvdPasadena, CA 91125